RAD 3D Worx
Modular Dual Battery Wall Mount for Milwaukee M18 – STL & 3MF Print Files
Product details
Description
Print a wall-mounted organizer for two Milwaukee M18 batteries, then print another when you need more space. Each module is a single piece with two sets of slide rails, latch recesses, four recessed mounting holes and dovetail ends that align adjoining modules.
Included in the download
- Bambu Studio 3MF project set up for a P1S with a 0.4 mm nozzle and PETG.
- STL mesh in millimeters for preparing the part in your preferred slicer.
- Print notes bundled with both files in one ZIP.
Print size and setup
One module measures approximately 221 × 80 × 26 mm with the end tabs. Battery centers are 108 mm apart. The project uses 0.2 mm layers, three walls, 18% gyroid infill and supports. Print flat on the mounting back and test the first module with your own packs before printing a full row.
This is a digital download. No physical product, batteries, or mounting hardware ships with it. The model is designed for Milwaukee M18 slide-on packs, not M12. For a finished PETG mount, shop the printed Milwaukee M18 battery holder.
Modular dual-mount design by RAD 3D Worx. Battery interface adapted from Smarty’s Milwaukee battery holder (CC BY 4.0).